Showing posts with label computer. Show all posts
Showing posts with label computer. Show all posts

Monday, April 30, 2007

You Owe Your PC to a Circuit Board Screwed onto a Piece of Plywood

It all Started with a simple integrated circuit board screwed onto a piece of plywood.

You owe your laptop or PC to a kit for flashing lights.

How was it that in our time the Personal Computer (P.C) and the laptop computer came about to be?

It all started with the invention of the transistor in 1949 by Bell Labs – the research arm of the "phone company". . The transistor was nothing more than a solid state electronic switch. The transistor or integrated circuit replaced the much larger vacuum tubes of the day. Vacuum tubes were large, hot and unreliable. Transistors performed essentially the same functions as tubes but were smaller , lighter , cooler and more reliable All said and done they were better ,smaller and more efficient than the vacuum tubes they replaced. . And transistors did not "burn out" like a vacuum tube.

Transistors allowed a trend of miniaturization that has led all the way to our present portable small laptop / notebook computers which can run on batteries. It is hard to visualize for us today that computers used to house large office buildings themselves – along with maintenance backup support staff and even their own air conditioners to remove the great amounts of heat the early, primitive computers produced.

In 1959 engineers at Texas Instruments figured out how to put more than one transistor on the same base and connect these transistors without wires. Thus the next step was born – the integrated circuit. The first integrated circuit consisted of only six transistors. Current computers have in the range of 100 million transistor equivalents.

In 1969 Intel introduced the 1 k memory chip. This was much larger than anything else produced at the time. Through coordination of Intel with a Japanese calculator manufacturer named Busicomp the next step was made where a generic multipurpose chip was devised. What made this step important was that no one chip could do a number of tasks. Previously each chip had a purpose that was burnt in. Now one integrated chip could do a number of different functions. One single integrated circuit chip was almost an entire computing device. The successor to this multi purpose integrated circuit or "CPU" was what went on to the basis of our whole generation and concept of personal computers/

In 1973 some of these microcomputer kits based on the initial 8080 Intel integrated chip were developed. In the hands of hobbyists these kits were put together and were nothing more than blinking lights. However the impetus was on. Many of these early hobbyists went on to become computer industry giants. With Intel introducing an even much more powerful microprocessor chip the computer industry was on its way.

A company MITS introduced the "Altair Computer Kit". The Altair was the impetus for fledgling software companies, such as Microsoft and Lotus, to write software programs for these early computers. Among the early innovators and producers of software in this field was Microsoft with its first version of Microsoft "Basic".

Along came the computer industry leader and stodgy monolith IBM to introduce the first "personal computer" in 1975. The model 1500 was beyond piddly compared to today's dollar store calculators and cost only $ 9,000.

Next came a smaller "upstart "Computer Company which came to be called Apple Computer. Apple computer introduced the Apple I computer in 1976 for the princely sum $ 695. Believe it or not original "Apple 1 computer" consisted of a main circuit board screwed into a piece of plywood. Talk about IBM having to hold its laughter The Apple I appeared to be such a home garage made amateur none professionally made product that the case and power supply were not even included. The buyer of the Apple I had to scrounge or source this himself. IBM thought the Apple I was nothing more than a foolish fad. A minor inconvenience that would soon go away and disappear. Yet department heads started buying these simple computers for uses in business departments. This was in spite of serious advice from IBM experts to corporations about the perils and shortcomings of these toy computers and outright threats by IBM salespeople to IT staff and heads.

The Apple I was followed in 1977 by the Apple II. The Apple II because of its enormous success set the standards for nearly all the important microcomputers to follow, including the IBM PC.

The very core of the early computer world – IBM "International Business Machines" – the master of the profitable mainframe computer industry had been awoken from its deep profitable slumber by a small upstart computer maker with a simple computer system that began its product cycle as an integrated circuit board screwed onto a piece of plywood.

Monday, April 16, 2007

Still Backing Up Your Data To A Tape Drive?

When it was determined that computers needed a good place to store the information they created, the tape drive was invented. This is a very old piece of computer technology, and as a result, you can imagine that it is not usually used for any but the most necessary of applications.

First of all, tape drives operate in the same way as a video tape does – it consists of a magnetic tape that is spooled out, written to, and then re-spooled. If you remember trying to cue a VHS or BETA tape to the correct part of a movie, then you can probably guess one of the biggest problems with using tape to back up important data that you may need to access quickly.

If you need to get back to a particular piece of data, then you have to run the entire tape up until that point to get it back. This is due to the fact that information is saved sequentially onto tape media. One benefit of tape media is that if you make the tape long enough, you theoretically have an unlimited amount of storage space. Therefore, huge corporate computer networks that have terabytes or more of information sometimes still use tape drives but they're much faster than the old models some of your reading this may be accustomed to.

Tape drives also spool slowly in general, which is done to make sure that the tape is not damaged while it is being written to. If just one part of the tape is damaged, the entire backup is pointless and the tape often is simply disposed of.

As you can either imagine or guess, these types of data storage were not widely available for a very long period of time. While there were some old computers that used small tape drives to get programs or games into the computer, most personal computers did not have a lot of backup storage capacity until the floppy disk was invented and finally provided an alternative to the tape drive.

So what are the main problems with tape drives?

There are quite a few to be frank. Tape is a very fragile material and one of the main problems that tape drives have is the tape itself getting snagged, bent or even broken at any point on the tape itself. Once this happens you need to start the entire backup process again with a fresh tape or you'd have to splice the old tape together again (not recommended). The information stored on data tapes is in a magnetic format so exposing the type to any type of electro-magnet or x-ray device can wipe the entire tape clean.

For the home computer user there are lots of different backup options that are far superior to tape drives - not that any home user is still using a tape drive to backup information to surely? For example, you could get an external USB hard drive and put the data there. You can also save all of your information to CD-Rs or DVD-Rs instead and this is just the tip of the iceberg in terms of data backup options for the modern computer user.